Login
Login Form
Pavia
Focus Area
|
|||
People
 Vittorio Berbenni |
 Stefania Ferrari |
 Marcella Bini |
 Giovanna Bruni |
 Doretta Capsoni |
 Chiara Milanese |
 Amedeo Marini |
 Alessandro Girella |
 Daniele Spada |
 Irene Quinzeni |
Publications
- NaAlH4 production from waste aluminum by reactive ball milling
- Ammonia-free infiltration of NaBH4 into highly-ordered mesoporous silica and carbon matrices for hydrogen storage
- Structure and properties of domperidone and its succinate salt
- Compaction pressure influence on material properties and sorption behaviour of LiBH4–MgH2 composite
- Synthesis of Li2SnO3 by solid state reaction and characterization by TG/DSC, XRPD, and MTDSC
- Nanoconfined 2LiBH4–MgH2 for reversible hydrogen storages: Reaction mechanisms, kinetics and thermodynamics
- Structural evolution upon decomposition of the LiAlH4 + LiBH4 system
- An experimental and theoretical investigation of loperamide hydrochloride-glutaric acid cocrystals
- Polymorphism and magnetic properties of Li2 MSiO4 (M = Fe, Mn) cathode materials
- Nanoconfined 2LiBH4–MgH2–TiCl3 in carbon aerogel scaffold for reversible hydrogen storage
- Preparation and physicochemical characterization of acyclovir cocrystals with improved dissolution properties
- Mechanochemical synthesis of NaBH4 starting from NaH-MgB2 reactive hydride composite system
- Hydrogen sorption performance of Mg-Ni-C-TiO 2 mixtures
- Perphenazine-fumaric acid salts with improved solubility: preparation, physico-chemical characterization and in vitro dissolution
- Pair distribution function analysis and Mossbauer study of defects in microwave-hydrothermal LiFePO(4)
- Hydrogen storage in 2NaBH4 + MgH2 mixtures: Destabilization by additives and nanoconfinement
- Role of Lithium Excess and Doping in Li1+xTi2-xMnx(PO4)(3) (0.00 ⇐ x ⇐ 0
- Hydrogen Sorption Performance of Mg-Ni-C-TiO2 Mixtures
- Quantification methods of amorphous/crystalline fractions in high-energy ball milled pharmaceutical products
- Mechanically assisted solid state synthesis of Mg2SnO4
- Thermodynamic and Kinetic Investigations on Pure and Doped NaBH(4)-MgH(2) System
- Mn influence on the electrochemical behaviour of Li(3)V(2)(PO(4))(3) cathode material
- Determination of the nateglinide polymorphic purity through DSC
- Hydrogen sorption performance of MgH(2) doped with mesoporous nickel- and cobalt-based oxides
- Thermal, Spectroscopic, and Ab Initio Structural Characterization of Carprofen Polymorphs
- Hydrogenation of carbon monoxide over nanostructured systems: A mechanochemical approach
- Hydrogen evolution reaction in PTFE bonded Raney-Ni electrodes
- Synthesis of YFeO(3) by thermal decomposition of mechanically activated mixtures Y(CH(3)COO)(3)center dot 4H(2)O-FeC(2)O(4)center dot 2H(2)O
- Characterization of Nicergoline Polymorphs Crystallized in Several Organic Solvents
- Synthesis, Characterization and Antibacterial Activity against Gram Positive and Gram Negative Bacteria of Biomimetically Coated Silver Nanoparticles
- Mechano-thermally Activated Solid-state Synthesis of Li(4)Ti(5)O(12) Spinel from Li(2)CO(3)-TiO(2) Mixtures
- Solid state synthesis of CuFe(2)O(4) from Cu(OH)(2)center dot CuCO(3)-4FeC(2)O(4)center dot 2H(2)O mixtures: mechanism of reaction and thermal characterization of CuFe(2)O(4)
- Mg-Ni-Cu mixtures for hydrogen storage: A kinetic study
- Effect of C (graphite) doping on the H(2) sorption performance of the Mg-Ni storage system
- New solid modifications of nateglinide
- Sorption properties of NaBH(4)/MH(2) (M = Mg, Ti) powder systems
- Structural, Spectroscopic, and Electrical Features of Undoped and Mn-Doped LiTi(2)(PO(4))(3)
- Synergetic effect of C (graphite) and Nb(2)O(5) on the H(2) sorption properties of the Mg-MgH(2) system
- Drug-excipient compatibility studies in binary and ternary mixtures by physico-chemical techniques
- Crystalline and amorphous phases of a new drug
- Phase stability and homogeneity in undoped and Mn-doped LiFePO(4) under laser heating
- Mechanothermal Solid-state Synthesis of Cobalt(II) Ferrite and Determination of its Heat Capacity by MTDSC
- H(2) sorption performance of NaBH(4)-MgH(2) composites prepared by mechanical activation
- PHYSICO-CHEMICAL CHARACTERIZATION OF ANHYDROUS D-MANNITOL
- Structural, spectroscopic and magnetic investigation of the LiFe(1-x)Mn⊗PO(4) (x=0-0.18) solid soluti
- Cr and Ni Doping of Li(4)Ti(5)O(12): Cation Distribution and Functional Properties
- Structural and spectroscopic characterization of Mo(1-x)W⊗O(3-delta) mixed oxid
- Thermodynamic relationships between nateglinide polymorphs
- The combined effect of mechanical and thermal energy on the solid-state formation of NiFe2O4 from the system 2NiCO(3)center dot 3Ni(OH)(2)center dot 4H(2)O-FeC2O4 center dot 2H(2)O
- Cations distribution and valence states in Mn-substituted Li4Ti5O12 structure
- Solid state formation of calcium ferrites from thermal decomposition of mixtures Ca(3)(C(6)H(5)O(7))(2)center dot 4H(2)O-Fe(2)(C(2)O(4))(3)center dot 6H(2)O - The role of mechanical activation on the mechanism of the thermal decomposition and the
- The effect of mechanical activation on the synthesis of MgFe2O4 from mixtures of MgCO3 center dot Mg(OH)(2)center dot xH(2)O and FeC2O4 center dot 2H(2)O
- Reactivity and hydrogen storage performances of magnesium-nickel-copper ternary mixtures prepared by reactive mechanical grinding
- Hydrogen storage in magnesium-metal mixtures: Reversibility, kinetic aspects and phase analysis
- A new tetrahydrated form of sodium naproxen
- Preparation of NiO-LiFeO2 solid solutions: the role of mechanical and thermal treatments
- Effect of high-energy milling on the solid state formation of zinc manganites (ZnMn3-xO4, 0.5
- New insights into the magnetic properties of the Ca2Fe2O5 ferrite
- Quantification of drug amorphous fraction by DSC
- Nanosized LiMn2O4 from mechanically activated solid-state synthesis
- Effect of mechanical activation on the formation of lead titanates from PbCO3-TiO2 mixtures
- Solid state synthesis of CaMnO3 from CaCO3-MnCO3 mixtures by mechanical energy
- Cation distribution in LiMgVO4 and LiZnVO4: Structural and spectroscopic study
- Synthesis and magnetic properties of ZnFe2O4 obtained by mechanochemically assisted low-temperature annealing of mixtures of Zn and Fe oxalates
- Structural and spectroscopic properties of pure and doped Ba6Ti2Nb8O30 tungsten bronze
- Solid state synthesis of stoichiometric LiCoO2 from mechanically activated Co-Li2CO3 mixtures
- Mechanochemically assisted solid-state synthesis of lithium gallates (LiGa5O8 and LiGaO2)
- Transport and structural properties of pure and Cr doped Li3VO4
- Thermal decomposition of gallium nitrate hydrate Ga(NO3)(3)center dot xH(2)O
- New remarks on the high-polarizability perovskite-related material CaCu3Ti4O12
- Hydration, stability, and phase transformations of a new antitumor drug
- Mechanical activation of calcium titanate formation from CaCO3-TiO2 mixtures
- Electric and dielectric properties of pure and doped CaCu3Ti4O12 perovskite materials
- Role of doping and CuO segregation in improving the giant permittivity of CaCU3Ti4O12
- Drug-excipient compatibility studies by physico-chemical techniques - The case of indomethacin
- Drug-excipient compatibility studies by physico-chemical techniques - The case of atenolol
- The effect of mechanical milling on the solid state reactions in the barium oxalate-iron(III) oxide system
- Structural transition in Mg-doped LiMn2O4: a comparison with other M-doped Li-Mn spinels
- Effect of extended ball milling on graphite
- Solid-state characterization of a novel chemotherapeutic drug
- Solid-state formation of lithium ferrites from mechanically activated Li2CO3-Fe2O3 mixtures
- Jahn-Teller transition in Al3+ doped LiMn2O4 spinel
- The effect of high energy milling on the solid state synthesis of MnFe2O4 from mixtures of MnO-Fe2O3 and Mn3O4-Fe2O3
- Oxidation behaviour of mechanically activated Mn3O4 by TGA/DSC/XRPD
- Electron paramagnetic resonance investigation of polycrystalline CaCu3Ti4O12
- Solid-state characterization of paracetamol metastable polymorphs formed in binary mixtures with hydroxypropylmethylcellulose
- Solid state synthesis of lithiated manganese oxides from mechanically activated (LiCO3)-C-2-Mn3O4 mixtures
- Stability of LiMn2O4 and new high temperature phases in air, O-2 and N-2
- Thermoanalytical and spectroscopic characterization of solid state dipyridamole
- Thermal decomposition and melting of a new carboxyindole derivative
- Increased chemisorption onto activated carbon after ball-milling
- Drug-excipient compatibility studies - Search of interaction indicators
- Micro-Raman and X-ray diffraction study of Y2BaNi1-xMxO5 (M = Mg, Zn) polymorphs
- Thermogravimetry and X-ray diffraction study of the thermal decomposition processes in Li2CO3-MnCO3 mixtures
- Solid state synthesis of strontium oxoferrates from the mechanically activated system SrCO3-Fe2O3
- Thermoanalytical (TGA-DSC) and high temperature X-ray diffraction (HT-XRD) study of the thermal decomposition processes in Li2CO3-MnO mixtures
- Inhibition of Jahn-Teller cooperative distortion in LiMn2O4 spinel by Ga3+ doping
- Polymorphism of rac-5,6-diisobutyryloxy-2-Methylamino-1,2,3,4-tetrahydro-naphthalene hydrochloride (CHF 1035). I. Thermal, spectroscopic, and x-ray diffraction properties (vol 90, pg 1154, 2001)
- Inhibition of Jahn-Teller cooperative distortion in LiMn2O4 spinel by transition metal ion doping
- Thermoanalytical and spectroscopic characterisation of solid-state retinoic acid
- Thermodynamics of a complex melting process: the case of spironolactone
- Polymorphism of rac-5,6-diisobutyryloxy-2-methylamino-1,2,3,4-tetrahydro-naphthalene hydrochloride (CHF 1035). I. Thermal, spectroscopic, and X-ray diffraction properties
- Effect of mechanical activation on the preparation of SrTiO3 and Sr2TiO4 ceramics from the solid state system SrCO3-TiO2
- Physicochemical study of the solid forms of a new drug
- Magnetic evidence of different environments of manganese ions in Mn-substituted strontium titanate
- Magnetic investigation of Mn ions in La,Mn : SrTiO3
- Boundary effects in finite Heisenberg antiferromagnetic S=1 chains: Y-89 NMR in Y2BaNi1-xMgxO5
- Physico-chemical characterization of a novel tricyclic beta-lactam antibiotic
- Solid state reaction study in the systems Li2CO3-FeC2O4 center dot 2H(2)O and Li2CO3-Fe-2(C2O4)(3)center dot 6H(2)O
- MTDSC calibration - Dependence of the instrumental response upon experimental conditions
- X-ray diffraction study of polycrystalline Y2BaO4: a test of the new EXPO program
- Thermal stability and structural transition of metastable Mn5O8: in situ micro-Raman study
- Ab initio structural approach on polycrystalline Y2-xCaxBaNiO5 (0 ⇐ x ⇐ 0.33) compo
- Characterization of sol-gel LiMn2O4 spinel phase
- Stoichiometry effects on the electrical conductivity of lithium-manganese spinels
- A novel method to obtain a beta-cyclodextrin inclusion compound by solid state reaction: The ketoprofen case revisited
- Physico-chemical characterisation of different solid forms of spironolactone
- LiMn2O4 low-temperature phase: synchrotron and neutron diffraction study
- X-ray powder diffraction ab initio structure solution of materials from solid state synthesis: the copper oxide case
- Structure-microstructure relationships in LiMn2O4 spinel phase
- X-ray powder structural and microstructural study of nanocrystalline copper oxide
- Structural and magnetic characterization of mixed oxides: A study of Li-Ni-O and Li-Mn-O systems
- Magnetic properties and spin dynamics in hole-doped S = 1 AF chain: Y-89 NMR and susceptibility in Y2-xCaxBaNiO5
- Magnetic order in Li-Mn spinels
- Evidence of a cationic substitution domain in lithium-manganese spinels
- Thermogravimetric study of the dehydration process of alpha-cyclodextrin: comparison between conventional and high-resolution TGA
- Solid state reaction study of the system Li2CO3/Fe2O3
- Stoichiometry of Li2MnO3 and LiMn2O4 coexisting phases: XRD and EPR characterization
- Ab initio structure determination of Li2MnO3 from X-ray powder diffraction data
- Transferred hyperfine interaction and structure in LiMn2O4 and Li2MnO3 coexisting phases: A XRD and Li-7 NMR-MAS study
- Electric and magnetic properties of LiMn2O4- and Li2MnO3-type oxides
- Spin dynamics in hole-doped NiO from Li-7 NMR in Ni1-xLixO
- Cationic and magnetic order in LiNiO2- and NiO-type Li-Ni mixed oxides
- Li-7 nuclear magnetic resonance spectra and relaxation in Ni1-xLixO
- Structural and defect study of LiMn2O4 formation
- Solid state reaction study of the system Co-Li2CO3
- Electron paramagnetic resonance response and magnetic interactions in ordered solid solutions of lithium nickel oxides
- STABILITY OF (NI1-XLIX)(LI1-YNIY)O-2 ORDERED SOLID-SOLUTION
- PHASE-COMPOSITION, MICROSTRUCTURE, AND SINTERING IN THE SYSTEM CO-LI2CO3
- PHASE-COMPOSITION, MICROSTRUCTURE, AND SINTERING IN THE SYSTEM CO-LI2CO3 (VOL 116, PG 15, 1995)
- DEHYDRATION OF THE CYCLODEXTRINS - A MODEL SYSTEM FOR THE INTERACTIONS OF BIOMOLECULES WITH WATER
- A DSC CHARACTERIZATION OF SULFUR SELENIUM INTERACTION PHENOMENOLOGY
- THERMAL STUDY OF WATER BETA-CYCLODEXTRIN INTERACTIONS
- THERMAL CHARACTERIZATION OF THE SYSTEM SULFUR - BORON SULFIDE
- THE ROLE OF THERMAL-TREATMENT IN THE PREPARATION OF LITHIATED NICKEL CATHODES FOR MOLTEN CARBONATE FUEL-CELLS
- ON THE THERMAL-STABILITY AND DEFECT STRUCTURE OF THE SOLID-SOLUTION LIXNI1-XO
- STRUCTURAL AND DEFECT STUDY OF NA-BETA”-GALLATE BY X-RAY-POWDER DIFFRACTION ANALYS
- ON THE THERMAL CHARACTERIZATION OF THE SYSTEM SULFUR-TETRACYANOETHYLENE
- STRUCTURAL CHARACTERIZATION OF NICKEL-OXIDE
- STRUCTURAL AND MICROSTRUCTURAL STUDY OF THE FORMATION OF THE SOLID-SOLUTION LIXNI1-XO
- ON THE ROLE OF LITHIUM-CARBONATE IN THE PREPARATION OF DOPED NICKEL-OXIDE CATHODES FOR MOLTEN CARBONATE FUEL-CELLS
- SOLID-STATE INTERACTION STUDY ON THE SYSTEM POLYVINYLPYRROLIDONE-XL TRIMETHOPRIM
- SOLID-STATE REACTION STUDY ON THE SYSTEM NI-LI2CO3
- THE EFFECT ON HEAT-FLUX DSC MEASUREMENTS OF PHYSICOCHEMICAL PROPERTIES OF THE SAMPLE
- ON THE QUANTITATIVE RELIABILITY OF HEAT-FLUX DSC
- SOLID-STATE REACTION STUDY ON THE SYSTEM NI-LI2CO3
- SOLID-STATE INTERACTION STUDY ON THE SYSTEM POLYVINYLPYRROLIDONE TRIMETHOPRIM
- ON THE DEHYDRATION ENTHALPIES OF SOME BETA-ALUMINAS
- AN ANALYSIS OF THE FACTORS AFFECTING THE PEAK SHAPE AND THE QUANTITATIVE RELIABILITY OF A HEAT-FLUX DSC-CELL
- PERFORMANCES OF A HEAT-FLUX DSC CELL
- HYDRATION AND CARBONATION OF BETA-ALUMINA POWDERS